When there are other options to be installed, install according to the procedure for each.

  1. Connect the power cord to the machine.
  2. Turn the main power ON.

  3. Pull out the tray slowly until it stops, and then adjust the side fences and end fence to match the paper size.

    To move the side fences, first pull out the tray fully, then push down the green lock at the rear of the tray.

  4. Check that the operation panel shows the following display.
    "Please supply the tray with paper."
  5. Square the paper and load it print side up.
  6. The paper size is basically detected automatically.