• When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.

  1. Remove the following exterior covers. (Exterior Covers)
    • Rear cover
    • Rear lower cover
  2. Remove the controller box cover [A].
    Red Circle: Remove / Blue Circle: Loosen
  3. Install the four stud stays [A] in the location as shown below.
  4. Install the optional counter interface board [A] on the four stud stays.

  5. Connect the supplied harness (13 pins) to CN3 [A] on the optional counter interface board and CN132 [B] on the BCU.

  6. Route the harness [A] and clamp it as shown below.

  7. Re-install the exterior covers.