1. Do SP4-806-001 (Super SP mode) to move the scanner carriage from the home position. This prevents dust from falling into the machine during transportation.
  2. Remove the toner cartridges. This prevents toner leaks, which are caused by vibration during transport.
  3. Make sure there is no paper left in the paper trays. Then fix down the bottom plates with a sheet of paper and tape.
  4. Take out the scanner stay from inside the front cover and install the scanner stay.
  5. Do one of the following steps:
    • Attach shipping tape to the covers and doors.
    • Shrink-wrap the machine tightly.
Cautions upon Lashing
  1. Position the machine so that its left side faces the wall. Make sure to put cushioning in between.
  2. Fasten the belt at the ridge line with cushioning.
  3. Make sure that the belt is over the front cover (at 45 - 75cm height from the ground).