• If you install a complete new PCDU, you do not need to perform SP 3-701. This is because the machine detects a new unit automatically when you cycle the main power off/on, and performs the initial adjustment automatically.

  1. Open the front cover.
  2. Open the right cover.
  3. Tilt the transfer unit [A].
  4. Remove the PCDU [A].

  • Carefully and slowly pull out the PCDU without tilting, to prevent toner spillage.

  • When installing the PCDU, push the PCDU into the machine while screwing it in, as shown below, and then secure the PCDU. If the PCDU is not installed straight, the transfer roller contact and release mechanism does not work properly and dirt may appear on the 2nd side of outputs.