"Output Priority When Paper is Fed to Finisher" Setting in User Tools
Some similar models took more than 10 seconds to start printing the first sheet to the finisher tray from sleep mode.
This machine can reduce the start time to print the first sheet to the finisher tray by reducing the throughput at startup.
[Reference] Measurements on a Similar Model (Met-C1)
Destination | Machine Model | CPM | Full System (First Print time from Sleep Mode to Finisher Tray) |
|---|---|---|---|
NA | MP C6003 | 60 cpm | 11.0 sec. |
Even with the NA and TWN models of SP C842DN, by setting [Output Priority When Paper is Fed to Finisher] in User Tools to [Print Start Time], the throughput at recovery time is adjusted as follows and the time to print the first sheet to the finisher is kept within 10 seconds.
SP C842DN specification (NA / TWN only)
Start time from sleep mode | Continuous print speed priority | Print start time priority |
|---|---|---|
Recovery from sleep mode: 1 to 15 seconds | 60 ppm | 50 ppm |
16 to 19 seconds | 60 ppm | 55 ppm |
20 seconds or more | 60 ppm | 60 ppm |
Setting Procedure
- Press [User Tools] icon> [Machine Features] > [System Settings] > [General Settings] > [Output Priority When Paper is Fed to Finisher].
- Set to [Print Start Time].