Change the necessary settings for the following SP modes if the customer has a service contract.

 

 

SP No.

Function

Default

SP5-930-001

Meter Click Charge

Enables or disables the meter click charge setting. ("1" ON,  "0" OFF)

When enabled ("1" ON):

  • The counter menu appears immediately after you push the "counter" key.
  • The "Counter Method" (SP5-045) sets the type of counter.
  • You can print the counter from the counter menu.

When disabled ("0" OFF):

  • The counter menu does not appear.
  • To check the counter, the technician must print the SMC report (SP 5-990).
"0": OFF

SP5-930-014

Meter Click Charge: Image Transfer Belt Unit

Enables or disables the PM alert for the image transfer belt unit.

If this SP is enabled, an alert message is displayed when the image transfer belt unit needs to be replaced.

"1": No alert

SP5-930-016

Meter Click Charge:

Fusing Unit

Enables or disables the PM alert for the fusing unit.

If this SP is enabled, an alert message is displayed when the fusing unit needs to be replaced.		"1": No alert

SP5-045-001

Counter method

Sets the counting method.

For details, see the table below.

"1": Prints

SP7-855-001 and -002

Coverage Range		SP7-855-001 and -002
Coverage Range: Sets the color coverage threshold.
Coverage rate = Coverage per page / A4 full coverage (dots) x 100
There are three coverage ranges, with a counter for each range: Color 1, Color 2, and Color 3
  • [A]: 5% (default) is adjustable with SP7855-001.
  • [B]: 20% (default) is adjustable with SP7855-002.
  • The value [B] must be larger than [A].
The total numbers of printouts (BW printing plus color printing) for each coverage range are displayed with the following SPs.
  • Color 1 counter: SP8601-021
  • Color 2 counter: SP8601-022
  • Color 3 counter: SP8601-023

SP5-104-001 (SSP)

A3/DLT double count

Specifies whether the counter is doubled for A3/DLT paper.

"0":Single

counting

SP5-812-001 and -002

Service Tel: Telephone / Facsimile

-001: shows or sets the telephone number of the service representative.

-002: shows or sets the fax number of the service station. The number is printed on the counter list when "Meter Click Charge" is enabled. Users can send the counter list as a fax message.

Counter Display Method

There are 3 types (Developments, Prints and Coverage). The display mode can be set with SP5-045-001 (Accounting counter: Counter Method).

Value

Mode

Descriptions

0

Development Count

YMC Development Counter

Bk Development Counter

1

Print Count

(Default)

Color Print Counter

B&W Print Counter

Color Total Counter

B&W Total Counter

2

Coverage Count

Color Total Counter

B&W Total Counter

Color Coverage Counter 1

Color Coverage Counter 2

Color Coverage Counter 3

7

Coverage Count (YMC)

Color Total Counter

B&W Total Counter

Color Coverage Counter 1 (YMC)

Color Coverage Counter 2 (YMC)

Color Coverage Counter 3 (YMC)

Installation is now completed.