• Do the following procedure not to damage any harnesses.
  • Check that harnesses are not damaged or pinched after installation.

  • When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.

  • This option is provided as a service part.
  • ONE SET OF ELECTRICAL COMPONENTS IS REQUIRED FOR ONE MACHINE when installing any heaters.
    e.g. When installing heaters for the standard tray and the 1-tray paper feed unit, only one set of electrical components is required.
  • Tray heaters vary depending on the destination.The tray heaters for NA have a red tag with “110 V to 130 V” written on it. First confirm that the destination of the unit and the voltage is correct, and then install the tray heater. If the combination is not correct, the paper feed tray may be damaged by excess heat.
  • Remove the red tag from the heater before installing the heater in the tray.