When the bottle is replaced after the machine detects that the waste toner bottle is full and stops, the counter for the Waste Toner Bottle is reset automatically.

When the bottle is replaced before the machine stops due to a full bottle, it is necessary to reset the PM counter manually (SP3-701-142).

To reset PM counter manually, do the following steps.

  1. Before replacing the waste toner bottle, set SP3-701-142 to "1" and switch the power OFF.
  2. Then replace the waste toner bottle and switch the power ON.

 

SP3-701 (Manual New Unit Set)

This SP is the new unit detection flag.

0: new unit detection flag OFF, 1: new unit detection flag ON

Item

SP

Waste toner bottle

SP3-701-142