• Make sure to do Color Registration/Color Calibration at the time of machine installation.

Color Registration

  1. Press "User Tools" on the home screen.

  2. Select [Maintenance: Image] > [Color Registration].
  3. Press [Start] to execute the auto color registration (it takes about 30 seconds).
  4. After "Color Registration is complete" appears, press [Exit].
Color Calibration

Color Calibration Flowchart

  1. Press "User Tools" on the home screen.

  2. Select [Maintenance: Image] > [Color Calibration].
  3. Press [Adjust Auto Density].
  4. Press [OK] to adjust Auto Density.

  5. Press [Print Test Pattern 1 for Calibration] to print the gradation correction sheet 1.

  6. Compare the printed test pattern of graduation correction sheet 1 [A] with the color sample (K) [A′] on the color chart that is provided with main machine, and select the correction value (0-6) that best matches the color.

  7. Press "Black".

  8. Enter the correction value, and press [OK].

  9. Set the correction values for M, and C/Y by the same method.

  10. After adjusting the highlight colors (steps 5 to 9), press [Print Test Pattern 2 for Calibration] to print the gradation correction sheet 2.

  11. Compare the printed test pattern of graduation correction sheet 2 [A] with the color sample (K) [A′] on the color chart that is provided with main machine, and select the correction value (0-6) that best matches the color.

  12. Set the correction values for the middle colors of K, M, and C/Y in the same way as you did for highlight colors with steps 7 to 9.


  13. After completing all the settings, press [Print Result] to print the adjusted result.
  14. Press [Save] to save the changed correction values and complete this procedure.