• When installing the image transfer lock unit, release the ITB lock lever and follow the steps below, taking care to avoid deformation of the pin inside the unit (circled in red below).
    If the pin is deformed, the shutter on the waste toner recovery path may not open and waste toner may clog the cleaning unit.

 

  1. Before installing, check that the lever on the image transfer lock unit is in the unlocked position.
    Unlocked position: The screws [A] are at the positions indicated by the red arrows. 
  2. Install the image transfer lock unit [A] so that the gear [B] on the image transfer unit side fits into the space in the image transfer lock unit circled in blue below.
  3. Attach the image transfer front cover. (Image Transfer Front Cover, Image Transfer Top Cover)
  4. Return the ITB lock lever [A] and ITB contact lever [B] to the locked position.