Target Part/SP No.: Tray Set Switch (1st Feed Tray) / SP5-803-016 (Tray 1: Set Sensor)

Cause verification

Problem Judgement

Manually press the referenced switch (Done after detaching paper feeding tray 1 from the machine.)

1: Not set

Pull out paper feed tray 1 from the machine.

0: Set

Solution:

  • Reconnect the connector.
  • Replace the sensor.
  • Replace the Paper Transport IOB.
  • Replace the harness.
1st Paper Feed Tray
Cause verificationSolution

Check the 1st tray set sensor to see if there are any defects.

Replace the 1st paper feed tray.