- Remove the shipping box [A].
- Cut the tapes on the on the cardboard box and open the cardboard flaps.
Remove the retainer [A] at the lower front right before lifting up the machine, because the handle for lifting the machine is hidden by the retainer [A].
Hold the handles located on both sides (blue circles), and then lift it slowly. Lifting it carelessly or dropping it may cause an injury.
- The printer weighs approximately 85 kg (187.4 lb.). Four or more people are required to lift the printer.
- Do not lift by holding the operation panel, because this might deform the machine or break the exterior covers.
Do not lift by holding the area shown below. Doing so may damage the exterior, and you may drop the printer.
- Remove the orange tape and retainers on the outside.
- Open the front cover.
- Remove the orange tape and the spacer [A].
Rotate the ITB contact/separation lever clockwise, and set it to the position in the following picture.
Close the front cover.
Pull out the 1st/2nd paper feed trays, and then remove the orange tape.
Remove the orange tape in the 2nd paper feed tray, and remove the accessories package (power cord, etc.).