The following problems occur.

When a change-over was made from a standard roller to the imaging range extension option

(If the SP setting is 0 (Default roller), but the optional longer paper transfer roller is installed)

  • The image cannot be correctly transferred to the SRA3 paper area.
  • The MUSIC/program control pattern adheres to the ends of the paper transfer roller (outside the A3 area), and this can transfer to the underside of printouts.
  • Real-time process control cannot be performed correctly, and an abnormal image and SC285-00 (MUSIC error) may occur.
When a change-over was made from the imaging range extension option to a standard roller

(If the SP setting is 1 (Wide roller), but the paper transfer roller is the normal one (SRA3 paper not supported))

  • Real-time process control is not performed, and the interval between process controls becomes short.
  • The waiting time for fusing temperature rise is longer than intended.