1. Remove the image transfer belt unit. (Image Transfer Belt Unit)
  2. Remove the PCDUs (Y, M, C, K). (PCDU Replacement)
  3. Remove the toner bottle drive motors. (Toner Bottle Drive Motor)
  4. Remove the sub hoppers. (Sub Hopper)
  5. Remove the ID chips. (ID Chip Contact Board)
  6. Put a piece of disposable paper [A] on the inside of the machine to avoid damage due to toner spillage.
  7. Put a piece of disposable paper [A] under the transport coil to avoid damage due to toner spillage.
  8. Remove all the harnesses connecting to the transport coil unit (×8).
  9. Remove the screws fixing the transport coil units [A] (×5, each color).
  10. Release the claws for the transport coil units [A] (claw ×1, each color).
  11. Remove the screws securing the bracket [A] (×2).
  12. Put a piece of disposable paper on the floor because toner can spill when you put the transport coil unit down.

  13. Pull out the whole transport coil unit [A] together with the bracket [B].

    • Be sure to put a piece of disposable paper on the floor because toner can spill when you put the transport coil unit down.

  14. Remove the transport coil unit for (Y) [A] (tab×1).