In this machine, the PCDU seal is automatically wound in on turning the power on, so there is no PCDU-related task such as pulling out the seal.

  1. Open the front cover.
  2. Shake the toner bottle (Bk) 7 to 8 times.
  3. Remove the toner bottle protection cap [A].
  4. Push the toner bottle into the machine slowly.
  5. Set the toner bottles (Y, M, and C) in the same way.
  6. Close the front cover.

  7. Connect the power cord to the machine.

    • Use the power cord that is provided with the machine. Do not use any other power cord. Also, do not use an extension cord.

  8. Turn ON the main power.
    • Toner Initialization starts. It takes about 5 minutes to fill the toner up.
      Be sure to wait long enough. If you do not, the Color Calibration will take longer.
    • During the initial setting, the message "Self checking..." appears.