Target Part/SP No.: Paper Exit Full Sensor / SP5-803-012 (Tray Full Exit Sensor)
Cause verification | Problem Judgement |
|---|---|
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 1: Full |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 0: Not full |
Solution:
- Reconnect the connector.
- Replace the sensor.
- Replace the Paper Transport IOB.
- Replace the harness.
Feeler for Paper Exit Full Sensor
| Cause verification | Solution |
|---|---|
Check if the operation of the feeler for the paper exit full sensor is prevented due to the presence of foreign material. | Remove the cause of the malfunction. |