No. | Description | Q’ty | Remarks |
|---|---|---|---|
1 | Paper Exit Tray | 1 | |
| 2 | Base Plate | 1 | |
| 3 | Correction Plate for Side-to-side Registration | 1 | |
| 4 | Coin Screw M4 | 1 | |
| 5 | Screw M4x6 | 1 | |
| 6 | Screw M3x6 | 1 | |
| 7 | Bind Screw M3x6 | 3 | |
| 8 | Coin Screw M4x8 | 4 | |
| 9 | Paper Exit Guide (Relay) | 1 | Use this when connecting a finisher downstream from the internal multi-fold unit. |
| 10 | Paper Relay Cover | 1 | |
| 11 | Left Upper Cover | 1 | Use this when connecting a finisher downstream from the internal multi-fold unit. |
| 12 | Support Tray : Shift | 1 | Use this for the Finisher SR3230 shift tray. |
| 13 | Support Tray : Proof | 1 | Use this for the Finisher SR3230 proof tray. |
| 14 | Driven Roller (Flat) | 1 | |
| 15 | Paper Support Guide (Small) | 1 | |
| 16 | Cushion (Top/Front) | 1 | |
| 17 | Cushion (Rear) | 1 | |
| 18 | Cushion (Paper Entrance) | 1 | |
| 19 | Cushion (Short) | 1 | |
| - | Sheet (applying pressure to the folding roller) | 1 | |
| - | Sheet (attaching the paper support guide) | 1 | |
| - | Sheet (keeping the accessories) | 1 | |
| - | Sheet (about interference with the finisher's I/F cables) | 1 |
When installing the internal multi-fold unit alone
Use the paper exit tray [1] and paper relay cover [10].
When connecting a finisher downstream from the internal multi-fold unit
Use the paper exit guide (relay) [9] and left upper cover [11].
The customer should keep the unused accessories included with the product. When connecting a finisher that was purchased separately or when disconnecting the finisher that is connected downstream from the internal multi-fold unit, if the customer did not keep the necessary accessories, order them as service parts.