- When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.
- The bridge unit cannot be used together with the internal multi-fold unit.
- Remove the orange tapes, shipping retainers, and the accessories (fixing screws, etc.) provided with this unit.
- Remove the paper exit tray [A].
- Remove the connector cover [A].
- Remove the paper exit feeler [A].
- Tuck in the lever [A] for detecting when the tray is full.
- Remove the driven roller [B] at the machine’s exit tray and attach the supplied driven roller [A].
- Insert a flat-headed screwdriver into the depression in the center, and then, lifting the driven roller, unlock the part indicated by the red arrow.
- When attaching the driven roller, push its center all the way in until it clicks.
[A]: The supplied driven roller has flat rollers.
[B]: The machine’s standard driven roller has drum-type rollers (as indicated by red frames). - Attach the paper support guide [A] (hook x 4).
- Open the front cover.
Remove the upper left cover [A].
- The screw removed is used again in step 14.
- Remove the small cover [A].
First, remove a screw. Then release the hooks on the inside of the front upper cover [A] by pulling the cover’s sides outward, and remove the front upper cover.
- Attach the right front bracket [A].
- Reattach the front upper cover [A], and small cover [B], and close the right door.
- Attach the bridge unit [A] to the machine.
- Attach the upper left cover [A] provided with the accessories (
×1).
- Attach the L type connecting bracket [A].
To fix the bridge unit securely on the machine, tighten the finisher's joint bracket and L type connecting bracket [A] together when installing the finisher. - Complete the bridge unit attachment. Refer to the procedure for connecting the optional unit downstream of the bridge unit.
- Booklet Finisher SR3240 (D3BB) (Finisher SR3230 (D3BA-17, -21))
- Booklet Finisher SR3220 (D3B9) (Booklet Finisher SR3220 (D3B9-17, -21))
- Finisher SR3210 (D3B8) (Finisher SR3210 (D3B8-17, -21))
- After the finisher is installed, turn ON the main power.
- Check that the finisher can be selected at the operation panel.