• SP3-101-001 to 004 (Toner Status :Disp)
    Displays the amount of toner remaining for each color. Uses a descending 10-step scale: 10: Full, 2: Estimated toner near end, 1: Definite toner end, 0: Toner end
  • SP3-110-001 to 004 (Near End Thresh)
    Sets the threshold amount for detecting near-toner end.
  • SP3-102-001 to 004 (Toner Remain:Disp: Bottle Motor Bk, C, M, Y)
    Displays the remaining toner calculated from the motor running time.
  • SP3-102-011 to 014 (Toner Remain:Disp: Pixel Bk, C, M, Y)
    Displays the remaining toner calculated from image coverage.
  • SP3-102-021 to 024 (Toner Remaining: Display: Fill Amount Bk, C, M, Y)
    Displays the full amount of toner in a new toner bottle.
    The amount is different for different bottle types (such as pre-installed toner bottles and replacement toner bottles).
    When a new toner bottle is installed, the data of the toner amount in the ID chip is saved in this SP.
    The value in this SP is then used to calculate how much toner is left in the toner bottle and for Toner Near End detection.
  • SP3-120-001 to 004 (TE Sn Detect Thresh: Bk, C, M, Y)
    Sets the starting threshold for toner near-end detection by the toner end sensor.
  • SP3-121-001 to 004 (TE Counter: Disp: Bk, C, M, Y)
    Displays the number of times the toner end sensor detected toner end.
  • SP3-122-001 to 004 (TE Sn NE Thresh: Bk, C, M, Y)
    Sets the number of toner end detections to start toner near-end detection.
  • SP3-163-001 (Bottle Drive: Set Rotation Time at Toner End)
    Sets the empty rotation time [ms] at almost toner-end.
  • SP3-133-011 to 014 (TE Detect :Set Page Cnt:K, C, M, Y)
    Displays the number of sheets printed after toner near-end is fixed.
  • SP3-133-031 to 034 (TE Detect :Set Pxl Cnt:K, C, M, Y)
    Displays the amount of toner used in cm2 after toner near-end is fixed.
  • SP3-210-001 to 004 (TD.Sens:Vt :Disp: Current: K, C, M, Y)
    Displays the latest TD sensor output.
  • SP3-131-001 (Vt TE Thresh: Delta Vt Thresh)
    Specifies the threshold to start adding the delta Vt after toner near-end.
  • SP3-132-001 to 004 (Delta Vt Sum: Bk, C, M, Y)
    Displays the integrated value of delta Vt.
  • SP3-131-011 (Delta Vt Thresh BF NE)
    Specifies the threshold to start integrating delta Vt before toner near-end.
  • SP3-131-012 (Delta Vt Sum Thresh BF NE)
    Specifies the threshold of delta Vt to check toner end before toner near-end.