Use A4/LT paper to make a temporary test chart as shown above.

  1. Put the temporary test chart on the ADF. Then make a copy from one of the feed stations.

  2. Check the trailing edge erase width. Adjust the following SP modes if necessary. The following diagram shows how the image is affected when you adjust in the + or -. direction.

     


    1: Feed direction

    SP Code

    What It Does

    Adjustment Range

    SP6-006-014

    Trailing Edge Erase Width (1-Pass):Face

    ± 5.0 mm

    SP6-006-015

    Trailing Edge Erase Width (1-Pass):Back

    ± 5.0 mm