1. Do SP2-111-003 (Mode c: rough adjustment).
  2. Use SP2-194-007 to check if the result of the line position adjustment is correct (0: Completed successfully, 1: Not completed). If the result is "1", refer to ‘Countermeasure list for color registration errors’.
  3. Do SP2-111-001 (Mode a: fine adjustment twice).
  4. Use SP2-194-007 to check if the result of the line position adjustment is correct (0: Completed successfully, 1: Not completed). If the result is "1", refer to ‘Countermeasure list for color registration errors’.
  5. Put some A4/LT paper on the bypass tray.

    • When you print a test pattern, use the bypass tray to feed the paper.

  6. Print out test pattern "7" with SP2-109-003.
  7. Check the printed output with a loupe.
  8. If there are no color registration errors on the output, the line position adjustment is correctly done. If not, refer to the countermeasure list for color registration errors.