Checking Paper Setting

Do the following procedure after installing all the options.

  1. Check that all tapes are removed. Then connect the power plug into the wall socket.
  2. Pull out the paper feed tray [A] until it stops.
  3. Release the side fence.
  4. Load paper into the paper feed tray.

  5. Set the side fence according to the paper size while pressing the unlock lever.

    • To move the fences, first pull out the tray fully. Then push down the green lock at the front inside the tray.

  6. Set the end fence according to the paper size while pressing the unlock lever.
  7. Set SP5-131 to set paper size for the main paper tray.

  8. Adjust the registration setting for paper trays.
    SP1-002-001 (Side-to-Side Registration By-pass Table)
    SP1-002-002 (Side-to-Side Registration Paper Tray 1)
    SP1-002-005 (Side-to-Side Registration Duplex)

    • Refer to the “Image Adjustment” section in this manual for how to adjust the SP setting.
    • If one or more optional paper trays is installed, do the following SPs as well:
      SP1-002-003 (Side-to-Side Registration Paper Tray 2)
      SP1-002-004 (Side-to-Side Registration Paper Tray 3)

Executing the Automatic Color Calibration (ACC)

  • Be sure to do this procedure when installing the mainframe.
  • Do not open the ADF while ACC is running.
  • Settings must be made before you can login as Administrator. (Refer to "Before You Begin the Procedure".)

  1. Login as Administrator.
  2. Press [User Tools] icon on the operation panel.
  3. Press [Machine Features].
  4. Press [Maintenance].
  5. Press [Auto Color Calibration]
  6. Press [Start] for the Copier function.
  7. Press [Start Printing].
  8. Take the sheet that was just printed, and put it on the exposure glass. Press [Start Scanning].

  9. Do the same procedure for the Printer function.

    • Be sure to check the four resolution-based items for the printer function.

Checking the Copy Image with Test chart

Check the copy image quality with a test chart.

For SP models, check that the printer can print out in the customer’s environment. For SPF models, check that the fax can output a received image as well.

Color Skew Adjustment

The skew adjustment of this machine should be performed manually.

The adjustment procedure is as follows:

  1. Execute ‘MUSIC’ (SP2-111-002) and check the result for each color with the following SPs.
    • SP2-117-004 (K)
    • SP2-117-002 (C)
    • SP2-117-001 (M)
    • SP2-117-003 (Y)
  2. The color skew adjustment (Color Skew Adjustment) should be executed if one or more of the above SP values is not within ±5. No skew adjustment is required if all SP values are within ±5.