- Do the same procedure for the 1st optional paper feed unit from step 1 to step 6.
- Do the following steps:
- Connect the harness [A] and heater connector for the 2nd tray.
- Remove the cap on the 1st tray harness.
- Connect the 2nd tray harness [B].
- Attach three clamps [E] and route the harness through them. (
× 5)
- A: To the 2nd tray heater
- B: To the 1st tray heater harness
- C: Not used
- D: Cap
- Reattach all the covers removed.