The automatic line position adjustment usually is done for a specified condition to get the best color prints.
Do the following if color registration shifts:
- Do "Auto Color Registration" as follows to do the forced line position adjustment.
- First do SP2-111-003.
- Then do SP2-111-001.
To check if SP2-111-001 was successful, watch the screen during the process. A message is displayed at the end. Also, you can check the result with SP2-194-010 to -012.
- You should also do the line position adjustment at these times:
- After you transport or move the machine (you should do the forced line position adjustment if you install the machine at the user location) if the machine is pre-installed at the workshop and moved to the user location,
- When you remove or replace the motors, clutches, and/or gears related to the drum/development/transfer sections
- When you remove or replace the image transfer belt, image transfer belt unit or laser optical housing unit