Before Replacing the Pickup Roller and Feed Roller

Before replacing the pickup roller and feed roller, reset the PM counter.

  1. Turn the power ON.
  2. Reset the PM counter. (Refer to Replacement Procedure of the PM/Yield Parts)
  3. Turn the power OFF.
Replacing the Pickup Roller
  1. Remove the original feed unit. (Original Feed Unit)
  2. Release the hook [A].
  3. Slide the shaft [A], and then remove the pickup roller [B].
Replacing the Feed Roller
  1. Remove the original feed unit. (Original Feed Unit)
  2. Remove the clip [A].
  3. Slide the shaft [A], and then remove the pin [B].
  4. Slide the shaft [A], and then remove the feed roller [B].