- Remove the following items.
- Scanner unit and ADF. (Scanner Unit with the ADF)
- 1-bin tray unit (1-Bin Tray BN1030 (D574-58))
Attach the IC card reader [A] to the rear of the front right cover [B] with the bracket [C]. (
× 1 included in this kit)
- The bracket [C] is different from that of the base machine. The bracket for the base machine cannot be used. Consult your supervisor to obtain the correct bracket.
- Route the USB cable [A] from the IC card reader as shown below, and then pull out the USB cable from the rear of the machine.
- Cut out the hole for the USB cable to pass through the scanner rear cover [A].
- Pass the USB cable from the IC card reader through the hole in the scanner rear cover, and then reassemble the machine.
- Attach the clamps [A] to prevent the cable from sagging.
Connect the USB cable to the USB connector at the left of the mainframe as shown above. Either connector can be used.
- Obtain these clamps [A] in advance, because they are not included in this kit.