1. Attach the joint bracket (front center) [A] to the paper feed unit that will be installed at the lowest position. (:Tapping × 2 (included in this kit))
  2. Put the optional paper feed unit on the paper feed unit that was fitted with the bracket [A] in step 1.
  3. Remove the paper trays.
  4. Join the two paper feed units with two joint brackets (rear) [A] and one screw [B]. (M3×6: × 3 (included in this kit))

    1: Rear
    2: Front center
  5. Reassemble the mainframe and the paper feed units.

    • Do not lift the machine together with one or more paper feed unit(s):
      If there is already a machine with one or more optional paper feed unit(s), be sure to disconnect the machine and paper feed unit(s), and lift them up separately when moving/transporting. Otherwise, the handle of the paper feed unit will break due to the mainframe’s weight, and it can cause an injury.

    • When installing the mainframe with two paper feed units, join the two paper feed units first, and then join the mainframe with the paper feed units.