• Turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.

You can only install one of the following network interfaces at a time:

  • File Format Converter
  • IEEE 1284 Interface Board
  • IEEE 802.11a/g/n Interface Unit
  • USB Device Server Option
  • Extended USB board
  1. Remove the slot cover [A].
  2. Install the file format converter [A] into the slot and then fasten it with screws.
  3. Plug in and turn on the main power switch.

  4. Check or set the following SP codes with the values shown below.

    SP No.

    Title

    Setting

    SP5-836-001

    Capture Function (0:Off 1:On)

    "1"

    SP5-836-002

    Panel Setting

    "0"

  5. Make sure that the machine can recognize the option (see Check All Connections at the end of this section).