1. Prepare a formatted SD card.
  2. Make sure that the write-protection on the SD card is off.
  3. Turn OFF the power.
  4. Remove the SD slot cover [A] at the left rear side of the machine.
  5. Install the SD card into the SD card slot 2 (lower) [A] (for service use).
  6. Turn ON the power.
  7. Enter the SP mode.
  8. Do SP5-846-051 (Backup All Addr Book).
  9. Exit the SP mode, and then turn OFF the power.
  10. Remove the SD card form the SD card slot 2 (lower).

  11. Install the SD slot cover.

    • If the capacity of SD card is not enough to store the local user information, an error message is displayed.
    • Carefully handle the SD card, which contains user information. Do not take it back to your location.