• Turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.
  • You need two or more persons to lift the mainframe. The mainframe is highly unstable when lifted by one person, and may cause injury or property damage.
  • Do not lift the machine together with one or more paper feed unit(s):
    If there is already a machine with one or more optional paper feed unit(s), be sure to disconnect the machine and paper feed unit(s), and lift them up separately when moving/transporting. Otherwise, the handle of the paper feed unit will break due to the mainframe’s weight, and it can cause an injury.
  • Be sure to hold the following positions when lifting the mainframe.

  1. Remove the tapes and the paper (EMC address) on the paper feed unit.

  2. Set the copier on the paper feed unit.

    • When installing a second paper feed unit, place it on the first paper feed unit. Then place the copier on the pair of paper feed units.

  3. Attach the appropriate paper tray number decal [A] and paper size decal [B] above and below the line [C] on each tray of the paper feed unit.
  4. Load paper into the paper tray(s) and set the side fences and end fence(s).
  5. Adjust the registration for each tray (Image Adjustment).
    • For tray 2, use SP1002-003
    • For tray 3, use SP1002-004
  6. Check the paper feed unit operation and copy quality.