Before Replacing the Waste Toner Bottle

When you replace the waste toner bottle AFTER a waste toner full or near-full message appears on the operation panel, the PM counters are automatically cleared after turning the main power ON.

When you replace the waste toner bottle BEFORE a waste toner full or near-full message appears on the operation panel, do the following procedure to reset the PM counter.

  1. Turn the power ON.
  2. Reset the PM counter. (Refer to Replacement Procedure of the PM/Yield Parts)
  3. Turn the power OFF.
Replacing the Waste Toner Bottle
  1. Pull out the paper tray.
  2. Open the front cover.
  3. Pull out the waste toner bottle [A].
  4. Install the five waste toner bottle caps on the waste toner inlets. The examples [A] in the photo are for black.