After replacing the NVRAM, the micro SD card is formatted when you turn the power on.
Before replacing the NVRAM, check the following table for the data in the micro SD card.
| Data | Data migration |
|---|---|
| Browser setting value | OK, only if the browser setting value has been downloaded by the end user with WIM. |
| Storage for SDK | Cannot be moved. This case is the same as a broken hard disk on a GW+ model. For information about the data in the micro SD and what to do with it, consult the software supplier in advance. |
- Remove the slot cover [A], and then remove the micro SD card cover [B].
- Push the micro SD card [A] to release the lock, then remove it.
Insert the replacement micro SD card, and then power the machine on.
The machine recognizes only micro SD cards configured as service parts.
- Format the micro SD card.
Do not turn the machine off during formatting. - After formatting, turn the power off and then back on.
- For details about what data is saved to the micro SD card, and the data transfer procedure when the micro SD card is damaged, refer to Notes on Data Storage Devices.