- Remove the LED head (LED Head).
- Pull up the leaf spring [A] and remove the toner end sensor [B].
- For information that is related to replacing the toner end sensor, refer to "When SC365/SC332 Is Displayed".
- After replacing the toner end sensor, set SP values according to the leaflet supplied with the unit. After replacing each part, 6 SP values must be adjusted. Set only the SP values corresponding to the replaced station. Check the colors listed under “Description” for the corresponding stations in the following SP value list.
Related SP:
SP No. | Description |
|---|---|
SP3-244-005 | TonerRmn HHThresh:Up:K |
SP3-244-009 | TonerRmn HHThresh::Low:K |
SP3-244-013 | TonerRmn NNThresh::Up:K |
SP3-244-017 | TonerRmn NNThresh::Low:K |
SP3-244-021 | TonerRmn LLThresh::Up:K |
SP3-244-025 | TonerRmn LLThresh::Low:K |
SP3-244-008 | TonerRmn HHThresh::Up:C |
SP3-244-012 | TonerRmn HHThresh::Low:C |
SP3-244-016 | TonerRmn NNThresh::Up:C |
SP3-244-020 | TonerRmn NNThresh::Low:C |
SP3-244-024 | TonerRmn LLThresh::Up:C |
SP3-244-028 | TonerRmn LLThresh::Low:C |
SP3-244-007 | TonerRmn HHThresh::Up:M |
SP3-244-011 | TonerRmn HHThresh::Low:M |
SP3-244-015 | TonerRmn NNThresh::Up:M |
SP3-244-019 | TonerRmn NNThresh::Low:M |
SP3-244-023 | TonerRmn LLThresh::Up:M |
SP3-244-027 | TonerRmn LLThresh::Low:M |
SP3-244-006 | TonerRmn HHThresh::Up:Y |
SP3-244-010 | TonerRmn HHThresh::Low:Y |
SP3-244-014 | TonerRmn NNThresh::Up:Y |
SP3-244-018 | TonerRmn NNThresh::Low:Y |
SP3-244-022 | TonerRmn LLThresh::Up:Y |
SP3-244-026 | TonerRmn LLThresh::Low:Y |