Enter the [Firmware Update] menu in the SP mode and update the package firmware.

  • The [Firmware Update] button will appear even when a machine is connected to @Remote with a device which does not have an embedded @Remote communicating function.
  • If an error code is displayed, refer to Error Screens during Updating

  1. Enter the SP mode.
  2. Touch [Firmware Update].
    Touch [Update].
  3. Touch [Execute Update].
  4. Touch [YES].

  5. The following will be displayed.

    • If the error code E66, which indicates that the download of the firmware has failed, is displayed, go back to step 1.
    • Update will be started automatically after the download is finished.
    • When the machine is in the update mode, the automatic update is suspended if a print job is started. After the print job is finished, touch [YES] on the display shown below to restart updating.

  6. [Update done] is displayed.
    • The machine will automatically reboot itself.

    • The figures at the lower right of the display indicate "Number of updated items/All items to be updated".