1. Turn OFF the power.
  2. Insert the SD card into the operation panel SD-card slot, and then turn ON the power.
  3. Enter SP mode.
  4. Select [System/Copy SP].
    In the printer model, select "ENGINE".
  5. Select SP5-992-001 (SP Text Mode) and press [EXECUTE].

  6. Select a detail SP number shown below to save data on the SD card.

    Detail No.

    SMC Categories to Save

    001

    All (Data List)

    002

    SP (Mode Data List)

    003

    User Program  (only for MF model)

    004

    Logging Data

    005

    Diagnostic Report

    006

    Non-Default

    008

    Capture Log (only for MF model)

    021

    Copier User Program (only for MF model)

    022

    Scanner SP (only for MF model)

    023

    Scanner User Program (only for MF model)

    026

    Printer SP

    027

    Smart Operation Panel SP (only for MF model)

    028

    Smart Operation Panel UP (only for MF model)

  7. Press [EXECUTE].
  8. Press [EXECUTE] again to start. Press [CANCEL] to cancel the saving.
  9. “It is executing it” is shown on the screen while executing.

  10. Wait for 2 to 3 minutes until “Completed” is shown.

    • The SMC list saving may take from 2 to 3 minutes to complete.
    • Press [CANCEL] to abort executing.

  11. Press [Exit] to exit from SP mode.