These machines and all peripherals are installed by the customer.
The installation procedures are described in the operating instruction manuals.
Change the necessary settings for the following SP modes if the customer has a meter click charge contract.
SP No. | Function | Default |
|---|---|---|
SP5-930-001 Meter Click Charge
| Enables or disables the meter click charge setting. ("1" ON, "0" OFF) When enabled ("1" ON):
When disabled ("0" OFF):
| "0": OFF |
SP5-930-010 Meter Click Charge: PCDU | Enables or disables the PM alert for the PCDUs. If this SP is enabled, an alert message is displayed when the PCDUs need to be replaced. | "1": No alert |
SP5-930-014 Meter Click Charge: Image Transfer Belt Unit | Enables or disables the PM alert for the image transfer belt unit. If this SP is enabled, an alert message is displayed when the image transfer belt unit needs to be replaced. | "1": No alert |
SP5-930-016 Meter Click Charge: Fusing Unit | Enables or disables the PM alert for the fusing unit. If this SP is enabled, an alert message is displayed when the fusing unit needs to be replaced. | "1": No alert |
SP5-045-001 Counter method | Sets the counting method. For details, see the table below. | "1": Prints |
SP5-812-001 and -002 Service Tel: Telephone / Facsimile | -001: shows or sets the telephone number of the service representative. -002: shows or sets the fax number of the service station. The number is printed on the counter list when "Meter Click Charge" is enabled. Users can send the counter list as a fax message. | |
Counter Display Method
There are 2 types (Developments and Prints). The display mode can be set with SP5-045-001 (Accounting counter: Counter Method).
0 | Development Count | YMC Development Counter Bk Development Counter |
1 | Print Count (Default) | Color Print Counter B&W Print Counter Color Total Counter B&W Total Counter |
Value | Mode | Descriptions |
|---|