Bypass Feed Tray Automatic Lifting System

The Bypass Tray Bottom Plate has an automatic lifting system.

When the Bypass Bottom Plate Clutch turns on, drive is transmitted to the bottom plate lifting system of the bypass tray. Once the drive is transferred to the system, the cam on the left as you face the machine starts rotating to lift the bottom plate up and down. The actuator that operates simultaneously with the cam is mounted on the left side of the cam. The up and down movement of the bottom plate is detected by the bottom plate position detection sensor when the actuator turns the sensor on and off.

Bottom Plate Position Detection Sensor

ON: Bottom plate is down

OFF: Bottom plate is rising

Bypass Bottom Plate Control Sequence

Bottom Plate Rising/Falling Control