1. Remove the right cover. (Right Cover)
  2. Remove the paper exit cover. (Paper Exit Cover (with Operation Panel))
  3. Remove the fusing unit. (Fusing Unit)

  4. Remove the metal bracket [A] (×6).

    • For the drawer connector of the fusing unit, washer screws are used.
    • After removing the screws, turn the connector [B] outward.

  5. Remove the solenoid [A] with the bracket (×2,×1,×1).
  6. Remove the duplex inverter solenoid [A] from the bracket (×2,×1).

  • Align the hole in the arm with the boss on the side of the bracket when attaching the solenoid.