1. Remove the paper exit cover. (Paper Exit Cover (with Operation Panel) - Printer Model)
  2. Turn over the paper exit cover, and remove the black cover [A].
  3. Remove the NFC board.
  4. Remove the 2 brackets [A], [B], and the relay board [C].
  5. Remove the screw.
  6. Open the operation panel [A] and remove the left hinge cover [B].
  7. Remove the right hinge cover [A].
  8. Remove the operation panel [A].


  9. Remove the 4 screws.
  10. Open the back cover [A] and disconnect the connector to remove the back cover.
  11. Remove the 2 brackets [A].
  12. Remove the LCD panel and the circuit board [A].
  13. Separate the LCD panel [A] from the circuit board [B].
  14. Remove the protection sheet [A].
  15. Remove all parts from the front cover [A].