1. Remove the paper exit cover with operation panel. (Paper Exit Cover (with Operation Panel) - MF Model)
  2. Turn over the paper exit cover, and remove the cover.

  3. Remove the relay board [A].

  4. Remove the NFC board [A].

  5. Remove the metal bracket [A].

  6. Remove the connector for the optional NFC [A].

  7. Remove the top cover [A].

  8. Remove the three screws of the hinge.

  9. Pass the connectors of the OPU [A] through the hole in the paper exit cover.

  10. Remove the cover [A].

  11. Remove the harness guide [A].

  12. Disconnect the harnesses.

  13. Remove the four screws of the hinge [A].

  14. Remove the bottom cover [A].

  15. After replacing the operation panel, make sure that the latest version of the Smart Operation Panel firmware has been installed. For details, refer to "Updating the Smart Operation Panel" in the Smart Operation Panel manual.
Internal Parts

For details about disassembling the Smart Operation Panel, see the service manual for Smart Operation Panel 2nd Generation.