1. Remove the rear cover. (Rear Cover - MF Model)
  2. Remove the controller box cover [A].

  3. Grip both ends of the rear top cover [A], and lift it off its hinges.

  4. Open the rear top cover [A], and remove it by lifting it up.

  5. Remove the scanner rear left cover [A] while pressing down strongly with your thumb on the blue circle area.

  6. Remove the scanner rear right cover [A] while pressing down strongly with your thumb on the blue circle area.

  7. Remove the four ground wires [A] and two FFCs [B].

  8. Remove the four harnesses.



  9. Remove the two ferrite cores [A], and then release all FFCs and the harness connected to the DF and scanner.
  10. Release the FFC under the scanner from the guide [A].

  11. At the right of the scanner/DF assembly [A], remove the two screws.

  12. At the left of the scanner/DF assembly [A], remove the screw.

  13. Slide the scanner/DF assembly [A] to the right and then remove it.

  • When attaching the Scanner/DF Assembly, first attach the screws [A] removed in Step 11, then attach the screw [B] removed in Step 12.