1. Remove the right cover. (Right Cover)
  2. Remove the paper exit cover. (Paper Exit Cover (with Operation Panel))
  3. Remove the fusing unit. (Fusing Unit)

  4. Remove the metal bracket [A] (×6).

    • For the drawer connector of the fusing unit, washer screws are used.
    • After removing the screws, turn the connector [B] outward.

  5. Remove the actuator [A] and partition plate [B].

  6. Remove the Mylar plate [A] attached under the sensor.

    • Do not discard the removed mylar plate because it will be reused when the sensor is installed.
    • When reattaching the plate, fit it within the 3 tabs of the sensor.

  7. Remove the paper exit full sensor [A] (×1, hook ×3).