Components
Component | Type | Configuration |
Processor | Intel Pentium Processor G1820 | 2.7GHz |
HDD | Serial ATA | 500GB |
SDRAM | PC3-10600 | 2GB, 240 pin |
BIOS ROM | Flash | 8MB |
EEPROM | EEPROM | 1Kbit |
Networking
Cable requirements:
- 10BaseT (Ethernet): Unshielded Twisted Pair (UTP), Category 3 or higher
- 100BaseTX (Fast Ethernet): UTP, Category 5 or higher (4-pair/8-wire, short length)
- 1000BaseT (Gigabit Ethernet): UTP, Category 5e or higher (4-pair/8-wire, short-length)
- If the print engine is 230V, use a shielded network cable.
Video Board
The Video Board functions include:
- High speed data transmission
- High speed data decompression
- Engine output at maximum rated output speed
The video interface controls such aspects of the print job as:
- Hardware decompression
- Print quality enhancement technologies
HDD
The HDD is used to optimize many parts of the printing system as well as improving throughput and ease-of-use. The HDD stores the following information:
- System software
- Non-volatile spooled print jobs
- Additional storage for compressed pages
- Non-volatile record of printed jobs (Job Log)
- Resource storage space for downloaded fonts
Non-Volatile Memory
- The 8MB Flash Memory contains the BIOS, etc.
- The 1Kbit EEPROM holds the MAC address data.
Volatile Memory
- SDRAM is one 2GB, PC3-10600, Double Data Rate 3 (DDR3), 240-pin.