Preparation

To prepare a USB flash drive, which is bootable and includes system software, the following items should be prepared:

• E-24B System Software DVD
• E-24B User Software DVD
• USB Setup Tool program Ver. 2.0.25 or later
• USB 3.0 or 2.0 flash drive, at least 16 GB capacity (Max. 32GB)
  

  

  • It is recommended to prepare a USB 3.0 flash drive for this model when installing the system from a USB flash drive. The system software size of the E-24B has been increased from previous Fiery embedded type controllers.
    Time required for installation (file transfer phase):  

    USB 3.0

    USB2.0

    E-24B (This model)

    About 10 minutes

    About 20 minutes

    E-22B (Previous model)

    Not supported

    About 10 minutes

  • Note: If a USB 3.0 flash drive is unintentionally attached to the USB 2.0 port, the time required will be the same as for a USB 2.0 flash drive.

• Windows 7/8/10 computer ("PC") with:
  
  • DVD drive, built-in or attached
    A DVD drive is not required if image files (*.ISO) of the system software and user software are provided.
  • Minimum 500MB of available memory.
    If preparing from the image files (*.ISO), an additional 8GB memory is required (internal or external disk)
  • USB port (support for USB 2.0 or later is recommended)