After you connect the E-24B to the copier, print the Test Page and the Configuration Page to verify that the connection between the E-24B and the copier is good.

  1. Make sure that the copier is not in use.
  2. Check the settings in the following table, and make sure that Letter or A4 paper is loaded in at least one of the paper trays of the copier.
     

    PS Setting Default Paper Size

    PCL Setting Paper Size for System Setting

    Setup Option

    "US"

    "Metric"

    "US"

    "Metric"

    Configuration Page requires…

    Letter

    A4

    -

    -

    PS Test Page requires…

    Letter

    A4

    -

    -

    PCL Test Page requires…

    -

    -

    Letter

    A4

  3. Press the Home button on the operation panel of the copier and wait for a few minutes until the Fiery icon appears on the Home screen.
  4. Touch the Fiery icon to access to the Fiery menu screen.
  5. Move to the "Fiery" tab.
  6. Touch the "Printable Info" button.
  7. Print the following pages:
    • Configuration Page
    • PS Test Page
    • PCL Test Page
  8. Examine the quality of the test pages.
    • All patches should be visible, but it is acceptable if they are very faint in the 5% and 2% ranges.
    • Each patch set should show uniform gradation from patch to patch as the shade lightens from 100% to 0%.
    • Poor image quality may indicate that the copier needs service. For more information, see the documentation provided with the copier.