There are two ways to activate the optional features: "Automatic" and "Manual".

Required Environment for Automatic Activation:

<Server Options>

  1. The E-24B must be connected to the Internet.

    • If the E-24B is not connected to the Internet directly, you can configure a proxy server for the connection.

  2. At the same time, a PC that can access to E-24B with the web browser is needed.

    • You can also start the activation procedure with the Command WorkStation, but later web browser access is required.

<Client Options>

  1. The PC where the optional feature will be installed and used must be connected to the Internet.
  2. At the same time, the same PC needs to access to E-24B with Command WorkStation and web browser.
Required Environment for Manual Activation:

<Server Options>

If the E-24B is not connected to the Internet, manual steps are required to transfer data between the E-24B and the EFI licensing website using another PC that is connected to the Internet.

  1. A PC that can access to the E-24B with web browser.
  2. Another PC that can connect to the internet with web browser is needed.

  • The above two PCs can be as same single PC (by switching the roles by changing the location/connection).

<Client Options>

If the PC where the optional feature will be installed, your PC is not connected to the Internet, manual steps are required to transfer data between the PC and the EFI licensing website using another PC that is connected to the Internet.

  1. A PC where the optional feature will be installed, must be connected to E-24B with the Command WorkStation.
  2. Another PC that can access to the Internet is needed.

  • The above two PCs can be the same single PC (by switching the roles by changing the location/connection).