1. Remove the side cover. [Link to Side Cover for the E-24B]
  2. Remove the video board. [Link to Video Board]
  3. Remove the front panel USB port cable [A] from USB A1.
  4. Remove the HDD LED cable [B] from J15.
  5. Remove the Power LED cable [C] from J15.
  6. Remove the front panel [A].
  7. Remove the front panel USB port cable [A] from front panel.
  8. Remove the HDD LED cable [B] from front panel.
  9. Remove the Power LED cable [C] from front panel.
  10. Remove the center panel [E] from the front panel [D].

For Re-assembling:

  • Make sure of where to connect the connectors for each cable.
  • Make sure that all connectors are inserted firmly in the sockets. Also, do not put the connectors in the sockets the wrong way around.