The end fence interlocking rotation detection plate is an automatic detection system which recognizes patterns by a 4-position push switch.
Size is detected by the detection patterns of knobs 1, 2, 3, and 4. Tray set is detected by another switch.
If there has been a change in the pattern, "MFP tray automatic size detection" control is performed continuously.
If the paper size is selected manually by user setting, the automatic size detection is overridden.
No. | Description | No. | Description |
|---|---|---|---|
1 | End fence | 3 | Size detection actuator |
2 | Size switch | 4 | Tray set switch |
- 2nd tray detection sizes:
SRA3, A3, B4, A4 SEF, LT SEF, B5 SEF, A4 LEF, B5 LEF, and A5 LEF - 2nd tray size detection patterns
Size | Knob | |||
|---|---|---|---|---|
4 | 3 | 2 | 1 | |
SRA3(12"×18") | 1 | 0 | 1 | 0 |
A3(DLT) | 0 | 1 | 0 | 0 |
B4(LG) | 0 | 0 | 1 | 1 |
0 | 1 | 1 | 1 | |
A4 portrait | 1 | 1 | 1 | 0 |
LT portrait | 1 | 1 | 0 | 0 |
B5 portrait | 1 | 0 | 0 | 0 |
A4 landscape(LT landscape) | 0 | 0 | 0 | 1 |
B5 landscape(Exe landscape) | 0 | 0 | 1 | 0 |
A5 landscape | 0 | 1 | 0 | 1 |
* "0" is switch ON (PUSH), "1" is switch OFF.
* The figures in parentheses are automatic detection sizes which can be switched over in SP mode (for SP settings, see "SP mode (paper supply transport)": SP5-181-002 to 006).
* SRA3=320×450mm(12.6"×17.7")
* Exe LEF=10.5"×7.25"
* If a pattern other than the above is detected, a blank is displayed on the operation panel.