• When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.

  • Before installing this option [A], first, you must install the "Paper Feed Unit PB3280 / Paper Feed Unit PB3300 [C] " or "LCIT PB3290 [B]".

  1. Remove the packing tape and retainers, and then remove the accessories (stud screws, etc.).

  2. Remove the eight covers on the right of the paper feed table.
  3. Attach the joint pins [A] to the front and rear on the right of the paper feed table.
  4. Attach the front bracket [A], rear bracket [B] at the positions of the joint pins (×4).
  5. Remove the paper feed table rear cover [A] (×2).
  6. Connect the harness [A].
    For a machine with LCIT PB3290

    For a machine with Paper Feed Unit PB3280 / Paper Feed Unit PB3300
  7. Clamp the harness.
    For a machine with LCIT PB3290

    For a machine with Paper Feed Unit PB3280 / Paper Feed Unit PB3300
  8. Attach the paper feed table rear cover.
  9. Attach the hook of the side LCT to the bracket.
  10. Connect the cable [A] of the side LCT to the machine (×1).
  11. Attach the connector cover [A] (×1).
  12. Push the side LCT towards the machine.
  13. Turn On the main power.
  14. Set the paper, and check that the paper size set in the paper feed tray is displayed on the control unit.
  15. Do the registration adjustment for the large capacity tray.
    SP1-002-007 (Side-to-Side Registration Large Capacity Tray)

SP descriptions

SP1-002 (Side-to-Side Registration)

Adjusts the side-to-side registration by changing the laser main scan start position for each mode and tray.

Increasing a value: The image is moved towards the rear edge of the paper.

Decreasing a value: The image is moved towards the front edge of the paper.