Process control adjusts the condition of the imaging hardware to maintain a constant image density. Process control is executed at the following times.
Process Control | Operative Condition | Related SPs | |
|---|---|---|---|
1 | PowerON ProCon :Set | When a certain time has passed after the previous job end (Except when recovering from an SC or jam) | SP3-530-001 SP3-530-002 SP3-530-003 SP3-530-004 SP3-530-005 SP3-530-006 SP3-530-007 SP3-530-008 |
2 | JobEnd ProCon:Set | When the value of the job end counter becomes more than the threshold (At job end) | SP3-534-001 to 004 SP3-534-011 to 014 |
3 | Interrupt ProCon :Set | When the value of the job interrupt counter becomes more than the threshold | SP3-533-001 to 004 SP3-533-011 to 014 |
4 | Non-useTime Procon :Set | When the value of the non-use time counter becomes more than the threshold | SP3-531-001 to 005 |
5 | Manual ProCon:Exe | When SP 3-011 is used | SP3-011-001 to 006 |
6 | Toner End Recovery | After the Toner End Status is cleared (Recovery is NOT done in the near end status) | - |
7 | Initial Developer Setting Process Control | When the machine detects a new PCU or development unit | - |